Choisissez vos composants. Montez votre arc. Partagez-le.

A 60 lb Darton Tritech 35 with an Axcel Landslyde slider and AVX-31 scope, an AAE Prophecy rest, Podium Archer bars and Victory RIP TKO arrows, set up for hunting after a season of 3D.

His 2026 hunting bow, a custom-painted Hoyt Carbon RX-10 Ultra at about 73 lb, set up for spot-and-stalk: a 2-pin Boonie, a short front bar and no side rod, a 3/16 in peep, and Easton 5.0 arrows with Nockturnal lighted nocks and G5 T2 broadheads.

His 2026 backcountry hunting bow: a 90 lb Hoyt AX-90 shooting four-fletched Easton X10 Parallel Pro arrows of about 480 grains with Grim Reaper Carni-Four broadheads. Hoyt built the AX-90 after he asked for a 90-pound bow, and its Keep Hammering Edition carries his name.

His elk setup for the 2026 archery season: a Mathews ARC 30 at 80 lb with an Axcel Driver sight, a QAD 1776 rest and Easton X10 Parallel Pro arrows.

His new 3D bow for the 2026 outdoor season: an Elite Victra 40 on the 75% let-off module with a Hamskea Everest rest, and the Bee Stinger and CBE bars from his indoor bow.

His Mathews ARC 30 at about 81 lb, built at Mathews in August 2025 and still his normal bow at the 2026 Total Archery Challenge events, with a five-pin UV Slider, a QAD MX2 rest, Mathews angled Bridge-Lock bars and UV 1K arrows of about 455 grains.